Thermo Fisher Scientific
Instrument
The 24-capillary 3500xL Genetic Analyzer sets the standard in capillary electrophoresis. The 3500-series instruments are the first genetic analyzers designed with a specific feature set and workflow for the Human Identification application. The complete product combines the instrument with Applied Biosystems™ reagents, consumables and software, as well as industry leading support, to provide an integrated HID system solution that significantly improves ease-of-use and application efficiencies.
• Increased Consistency – Reduced signal variation with factory standardization and optional in-lane normalization
• Real-Time Data Quality Assessment – On instrument data evaluation features provide rapid identification and re-injection of samples requiring additional processing
• Improved Thermal Control – Smaller oven design and improved door seal for more consistent data migration
• HID Specific Workflow – Pre-configured for Applied Biosystems™ amplification kits to simplify run setup and software navigation
• Effortless Consumable Installation – Convenient one-time use consumable packaging
• Consumable Tracking with RFID Technology – On-instrument, real-time monitoring of consumable consumption and expiration
• Enhanced Throughput – Faster data generation with 8 or 24 capillary arrays and shorter run times
• Improved Polymer Pump Design – Reduced waste and fewer bubbles for better data quality
• Simplified Instrument Installation & Operation – New solid-state laser eliminates need for high voltage wiring and external venting
• Streamlined Instrument Maintenance – HID specific performance check and maintenance scheduling tools
• Data Chain of Custody – Controlled access and tracking through Security, Audit and eSig features
Software Type | GeneMapper ID-X Software |
Amperage | 15 A |
Capillary Length | 50 cm, 36 cm |
Dimensions (L x W x H) Exterior | Electrophoresis Unit Width (Closed Door): 61 cm, Electrophoresis Unit: 122 cm (W) (open door) x 61 cm (D) x 72 cm (H) |
Electrical Requirements | 20 kV, 15 A |
External Computer | Hard Drive: 2x 500GB SATA 3.0 Gb/s and 8 MB Data Burst Cache, Memory: 16 GB (2x 8GB) 1600 MHz DDR3 Non-ECC. 4th Gen Intel Core I7 Processor- 3.1 GHz Turbo Processor, Operating System: Windows 7 SP1 |
Format | 96-well Plate, 384-well Plate, 8-tube Strip |
For Use With (Equipment) | 3500xL Genetic Analyzer |
Green Features | Energy efficient, Fewer resources used and less waste |
Height (English) Exterior | 28.3 in. |
Height (Metric) Exterior | 72 cm |
Laser Features | Long-life single-line 505 nm solid-state laser excitation source., Long-life single-line 505 nm solid-state laser |
Max. Voltage
|
Electrophoresis Voltage – Up to 20 kV |
Number of Capillaries | 24 Capillaries |
Operating Environment | Humidity: 20%-80% (non-condensing), Room temp.: <2° fluctuation during runs, Room temp: <2° fluctuation during runs, Temperature: 15°C-30°C, Humidity: 20–80% (non-condensing) |
Operating System | Windows 7 (Service Pack 1) |
Polymer | POP-4™, POP-6™, POP-7™ |
Polymer Consumption | Replace at earliest of 14 days⁄384 samples⁄20 injections (384-sample pouches), Replace at earliest of 14 days⁄96 samples⁄5 injections (96-sample pouches), Replace at earliest of 14 days⁄960 samples⁄50 injections (960-sample pouches) |
Read Length | ≥420 bp using a 36 cm capillary and POP-4™ |
Run Time | 30 to 140 min. (varies depending on run module) |
Software Compatibility | GeneMapper™ ID-X Software |
Throughput | ≥ 936 samples/day (HID36_POP4), Range: 240 to 1104 sequencing samples per day (varies depending on run module), ≥264 samples per day (standard sequencing with POP-7™ and 50 cm capillaries), ≥936 samples per day (HID36 POP4 Module) |
Warranty | 1 Year Limited Warranty on Parts and Labor, Service Installation and Application Training Included |
Weight | 82 kg (approximately) |
The 3500xL analyzer is shipped with the following system components:
• Capillary Electrophoresis instrument.
• 3500xL (24-capillary) array and POP™ polymer
• Human identification reagents and other consumables for system qualification.
• Dell™ computer workstation with flat-screen monitor.
• Integrated software for instrument control, data collection, quality control, and basecalling or sizing of samples.
The GlobalFiler Express PCR Amplification Kit and Prep-n-Go Buffer (for buccal swabs) combines the features of our GlobalFiler Express PCR Amplification Kit with the convenience of sample processing using our Prep-n-Go Buffer (for buccal swabs). The GlobalFiler Express kit is the first 6-dye, 24-locus STR kit that enables direct PCR amplification, eliminating the need to perform DNA extraction or purification steps for DNA database and other single-source reference samples. Prep-n-Go Buffer (for buccal swabs) is specifically designed to enable high-quality direct PCR amplification of single source samples collected on untreated paper or buccal swabs.
The GlobalFiler PCR Amplification Kit is the first 6-dye, 24-locus STR kit that combines maximum compatibility with global databasing loci standards, with dramatically reduced amplification time and superior discrimination power, helping to enable forensic DNA labs worldwide to maximize information recovery and improve overall efficiency. The GlobalFiler kit is part of a fully integrated and validated forensic DNA workflow backed by best-in-class global training, service, and support. This kit is optimized for casework samples and is also available in a format containing an internal quality control (IQC) system, helping forensic DNA labs worldwide maximize information recovery and improve overall efficiency. For database and single-source samples, please see our GlobalFiler Express PCR Amplification Kit.
The AutoMate Express Forensic DNA Extraction System is an easy to use, robust bench-top instrument that utilizes the PrepFiler Express and PrepFiler Express BTA chemistries packaged in pre-filled, foil sealed cartridges. We have designed the PrepFiler chemistry specifically to improve the quantity and quality of DNA isolated from forensic samples, thereby increasing the potential to obtain maximum information from downstream STR analysis.
The Applied Biosystems VeritiPro Thermal Cycler delivers proven reliability with advanced temperature control technology and connectivity. Take advantage of next-level PCR technology featuring faster ramping speeds and lower noise output. Connect to the cloud-enabled VeritiPro Thermal Cycler remotely. Conveniently design and securely upload your methods, monitor runs, and check instrument availability from any mobile device or desktop computer using Connect, our cloud-based platform.
Amped DVRConv is the easiest way to automatically batch convert unplayable video files. Videos from proprietary CCTV/DVR systems, dashcams, body worn cameras, and any other video source can now be converted without effort. With Amped DVRConv, you just drag, drop, and you’re done. This is an ideal tool for technicians tasked with converting a great number of surveillance videos in various proprietary formats, speeding up the triage in cases such as major investigations.
Amped Replay is an enhanced video player that allows investigators, frontline officers, first responders, security personnel and CCTV operators to conduct a quick first-level analysis of their videos, with easy conversion, quick corrections, redaction, and annotation functions, as well as a report, ideal for case building and disclosure. It includes Amped Software’s powerful DVR video conversion engine to view video without the need for other non-compatible, legacy, or proprietary player software. Its easy-to-use interface means no advanced skills are required to achieve professional results in the presentation of evidence, whether used as part of a case, forwarded to another unit or intelligence analysts, or sent to the media for identification. With Amped Replay, organizations are reassured that video is processed correctly at all levels, using validated forensic tools.
The SL-450 is ruggedly portable and cable-free while allowing users to move unhindered around any crime scene location. Its powerful 35W Xenon lamp is powered by a lithium-ion battery that provides 90 minutes of continuous power.
SUITCASE SCENE EXAMINATION VERSATILE
Model: Army Compact Kit
Manufacturer: Lynn Peavey
Origin: United States
Model: HotShot Fingerprint Developer
Manufacturer: Lynn Peavey
Origin: United States